Nut with mounting thread type FGR

Nut with mounting thread and tube type ball return


Bild Masszeichnung FGR

Datenblatt

CarryDimensionsLoad rates
ScrewNut
d 0x pd1d2D1MLnL2iDwBSSATCdynCstat
0/-0.1+0.5/0
mmmmmmN
right-hand threads:
6 x 2  5.7 4.616M12x12281x3.51.592.50.06 1’700 2’300
8 x 2  8.0 6.518M14x12481x3.51.592.50.06 2’000 3’200
8 x 2  8.06.518M14x12481x3.51.592.5ø2K0.06 2’000 3’200
8 x 2.5  8.0 6.617.5M15x12481x3.51.592.50.06 2’000 3’200
8 x 2.5  8.06.617.5M15x12681x3.51.592.5ø2K0.062’0003’200
8 x 5  8.06.718M14x12582x1.51.502.50.06 1’960 3’470
8 x 8  8.06.618M14x12582x1.51.502.50.061’5002’500
10 x 2  9.7 8.219.5M17x12271x3.51.592.50.06 2’300 4’000
10 x 2  9.7 8.219.5M17x12271x3.51.592.5ø2K0.06 2’300 4’000
10 x 3  9.9 7.821M18x12991x3.52.0030.06 2’800 5’000
10 x 3  9.9 7.821M18x12991x3.52.003ø2K0.06 2’800 5’000
10 x 10  9.8 7.923M18x13592x1.52.0030.06 2’500 4’500
10 x 10  9.8 7.923M18x13592x1.52.003ø4K0.06 2’500 4’500
12 x 4  12.0 9.826M20x13281x3.52.502.50.07 5’50011’000
12 x 4  12.0 9.826M20x134101x3.52.502.5ø4K0.07 5’50011’000
12 x 5  12.0 9.526M20x13781x3.52.7830.07 6’60012’000
12 x 5  12.0 9.526M20x13781x3.52.783ø4K0.07 6’60012’000
12 x 10  11.99.726M20x13782x1.52.503.00.074'4007'700
12.7 x 12.7  13.110.329.5M25x1.550122x1.53.5030.07 8’00015’500
12.7 x 12.7  13.110.329.5M25x1.550122x1.53.503M5B0.07 8’00015’500
14 x 2  14.012.526M22x1.532102x2.51.5930.064’50010’000
14 x 2  14.012.526M22x1.532102x2.51.593ø2K0.064’50010’000
14 x 4  14.011.529M22x1.53281x3.52.7830.07 8’10016’000
14 x 4  14.011.529M22x1.538101x3.52.783ø4K0.07 8’10016’000
16 x 2  16.014.530M26x1.528121x2.51.593.50.06 2’500 5’500
16 x 2  16.014.530M26x1.528121x2.51.593.5ø2K0.06 2’500 5’500
16 x 5  15.713.032M26x1.542121x3.53.5040.0712’00025’000
16 x 5  15.713.032M26x1.547121x3.53.504M5K0.0712’00025’000
16 x 10  15.713.032M26x1.547121x2.53.5040.07 8’50012’500
16 x 10  15.713.032M26x1.552121x2.53.504ø4K0.07 8’50012’500
16 x 10  15.713.032M26x1.547122x2.53.5040.0717’00025’000
16 x 10  15.713.032M26x1.552122x2.53.504ø4K0.0717’00025’000
16 x 16  15.913.232M26x1.547123x1.53.004.00.079'15018'750
20 x 2  20.018.536M30x1.530122x2.51.5940.064’60015’000
20 x 5  19.216.536M30x1.542121x3.53.5040.0713’70029’900
20 x 5  19.216.536M30x1.547121x3.53.504ø4K0.0713’70029’900
20 x 10  19.516.538M35x1.558192x2.53.5040.0721’00051’000
20 x 10  19.516.538M35x1.558192x2.53.504ø4B0.0721’00051’000
20 x 20  20.016.538M35x1.558192x1.53.5040.0710’00022’000
20 x 20  20.016.538M35x1.564192x1.53.504ø4B0.0710’00022’000
20 x 20  20.017.338M35x1.558194x1.53.0040.0714’60035’000
25 x 5  24.621.544M40x1.558192x2.53.504.00.0717'50042'400
25 x 10  24.821.843M40x1.558192x2.53.5040.0721’00054’000
25 x 10  24.821.843M40x1.558192x2.53.504ø4B0.0721’00054’000
25 x 25  24.521.244M40x1.572202x1.53.504ø4B0.0810’00024’000
25 x 25  24.521.244M40x1.572204x1.53.504ø4B0.0820’00048’000
32 x 10  31.628.452M48x1.562192x2.53.504ø4B0.0720’00055’000
 
left-hand threads:
6 x 2  5.7 4.616M12x12281x3.51.592.50.06 1’700 2’300
10 x 2  9.78.219.5M17x12271x3.51.592.50.062’3004’000
10 x 3  9.9 7.821M18x12991x3.52.0030.06 2’800 5’000
10 x 3  9.9 7.821M18x12991x3.52.003ø2K0.06 2’800 5’000
12 x 5  12.09.526M20x13781x3.52.7830.076’60012’000
14 x 4  14.011.529M22x1.53281x3.52.7830.07 8’10016’000
14 x 4  14.011.529M22x1.538101x3.52.783ø4K0.07 8’10016’000
16 x 5  15.713.032M26x1.542121x3.53.5040.0712’00025’000
16 x 5  15.713.032M26x1.547121x3.53.504M5K0.07 12’000 25’000
20 x 2  20.018.536M30x1.530122x2.51.5940.064’60015’000

Legend

  • d0
    nominal screw diameter [mm]
  • d1
    outside screw diameter [mm]
  • d2
    core diameter [mm]
  • p
    pitch [mm]
  • i
    number of ball circulations [–]
  • Dw

    ball diameter [mm]

  • B
    pin wrench hole (position not defined) [mm]
  • S
    lubrication hole (position not defined) [mm]
  • SA

    wipers

    • K = plasticK = plastic
    • B = brushesB = brushes
    • F = felt rings* F = felt rings*

    * on request; in case of lifetime lubrication

  • T
    standard backlash [mm]
  • 3)
    only on request

Warning! Note when selecting a ball screw that the maximum rotational speed depends on the system’s rotational speed characteristics.


Special designs available on request.
All specifications are subject to change without notice.

Quality management ISO 9001:2008




Technical Basics

Carry screws are manufactured by the highly economical cold-rolling process which offers both significant cost savings but also maintains a precision previously often only available with machine-ground screws. Carry screws are complemented by a range of single steel nuts produced in a special cost-cutting process.

Contract work

As our name suggests, thread rolling is the core business of Eichenberger Gewinde AG. Not only do the buyers of standard products benefit from our expert know-how but also those manufacturers who require economical cold rolled threads for their mechanical parts and components.